Huawei MCUD1 10GE Uplink Card

Leírás

Huawei MCUD1 10GE Uplink Card is MA5608T main control board integrated with 2-port GE and 2-port GE/10GE optical uplink.

Huawei MCUD1 10GE Uplink Card Product Overview

Huawei MCUD1 10GE Uplink Card is a mini control unit board. It is the core of the system control and service switching and aggregation. And it can also function as the management and control core of the integrated network management system (NMS). It communicates with service boards about the key management and control information through the master/slave serial port and inband GE/10GE channel. In this manner, the H801MCUD1 board configures, manages, and controls the device, and also implements the simple route protocol functions.

Huawei MCUD GE Control Card is MA5608T main control board integrated with 4-port GE optical uplink.

Huawei MCUD1 10GE Uplink Card is MA5608T main control board integrated with 2-port GE and 2-port GE/10GE optical uplink.

Huawei MCUD1 10GE Uplink Card Product Pictures

Huawei MCUD1 10GE Uplink Card Specifications

Elemek	Leírás
típus	The one-fibre bi-directional optical module
Működési hullámhossz	Tx: 1577 nm
	Rx: 1270 nm
Tokozás típusa	XFP
Port Rate	Tx: 9.95 Gbit/s
	Rx: 2.49 Gbit/s
Minimális kimeneti optikai teljesítmény	2 dBm
Maximális kimeneti optikai teljesítmény	6 dBm
Maximális vevő érzékenység	-27.5 dBm
Optikai csatlakozó típusa	SC/UPC
Optikai szál típusa	Egymódú
Reach	20 km
Túlterhelés optikai teljesítmény	-7 dBm
Kihalási arány	8.2 dB
Standard ID	Leírás
ITU-T G.987.1	10Gigabit-capable Passive Optical Networks (XG-PON) General Requirements
ITU-T G.987.2	10Gigabit-capable Passive Optical Networks (XG-PON) Physical Media Dependent (PMD) Layer Specification
ITU-T G.987.3	10Gigabit-capable Passive Optical Networks (XG-PON) Transmission Convergence Layer Specification
ITU-T G.988	10Gigabit-capable Passive Optical Networks (XG-PON) ONU Management and Control Interface Specification

Huawei MCUD1 10GE Uplink Card Features

Access and Aggregation Integrated

Large aggregation capacity, 3.2T bit/s backplane capacity, 1920G bit/s switch capacity, 512K MAC addresses

High density GE/10GE interfaces for cascading, up to 128*10GE or 768*GE interfaces, no need for additional investment of aggregation switches

High reliability networking support direct connection to the

BRAS, ONU dual-homing to two OLTs for redundancy and hitless software upgrade function

Any Access

High performance IPTV service, more ISP access

H-QoS support 4-level QoS guarantees OLT wholesale Traditional E1 service access, Native TDM or CESoP for traditional

E1 service of enterprise and mobile base station access

E2E high reliability guarantees business customers and mobile backhaul, BFD/LAG/MSTP/RRPP/Smart Link for uplink redundancy and Type B/Type C/Type C dual-homing for fiber protection

E-LAN function for local traffic inter-connection, meet the requirements of enterprise and campus network

Zöld Design

With the unique GPON chipsets, the maximum power consumption of the 16-port GPON line card is only 50W, 30% less than industry.

With the unique energy-saving bus, the idle service card and idle service port can be powered off.

Smooth Evolution

Smooth evolution from GPON to NGPON with the integrated platform

Smooth evolution from IPv4 to IPv6 with IPv4/IPv6 dual-stack,

support IPv6 MLD

Huawei MCUD1 GE Control Card and MUC Port Specs

Tábla	Panel ports	Internal interfaces	Channel to the standby control board
		Channel to the GIU board
H801MCUD	4 GE portok	2 GE/10GE ports	Providing one 10GE port for load sharing with the standby H801MCUD board
H801MCUD1	2 GE ports and 2 GE/10 GE ports	2 GE/10GE ports	Providing one 10GE port for load sharing with the standby H801MCUD1 board
H801MCUE	4 GE portok	2 GE/10GE ports	Providing one 10GE port for load sharing with the standby H801MCUE board

Huawei MCUD1 10GE Uplink Card Applications

Sajnálom, nem elérhető melléklet !