- 설명
- 문의
- 부착
설명
Huawei MPLA Board is 10G Gigabit main control unit for huawei OLT MA5800 X7 X15 X17
| Board | Channel to the service/Upstream interface board | Maximum Bandwidth per Slot |
| H901MPLB | 17 100GE channels | 200 기가비트/초 (부하 공유 모드) |
| H901MPLA | 17 50GE channels | 100 기가비트/초 (부하 공유 모드) |
Huawei MPLA Board Product Overview
Huawei MPLA Board is the main control unit board, the core of system control and service exchange convergence, and can also be used as the management and control core of the unified network management. H901MPLA transmits key management and control information through the master-slave serial port, the in-band GE / 10GE channel and the service board, completes the configuration, management and control of the entire product, and at the same time implements simple routing protocols and other functions.
The MA5800 multi-service access equipment is the industry’s first distributed architecture intelligent aggregation OLT platform, NG-PON용 차세대 OLT로 자리매김
Huawei MPLA Board Product Pictures
Huawei MPLA Board Product Specifications
| 상표 | 화웨이 |
| 모델 | MPLA |
| Bandwidth per slot | 100기가비트/초 (부하 공유 모드) |
| MAC 주소 테이블 | 262144 |
| Access ONT | 17408 |
| Multicast user | 17408 |
| Configurable multicast channel | 4096 |
| Concurrent multicast channel | 4000 |
| IPv4 routing table | 65536 |
| IPv6 routing table | 16384 |
| Service port | 262144 |
| ARP table | 65536 |
| ACL rule | 1042 |
| Maximum Frame Size | 2052 바이트. After the jumbo frame function is enabled, |
| a maximum of 9216 bytes can be supported. | |
| 작동 온도 | -40°C to +65°C |
| 전력 소비 | 공전: 62여 |
| 최고: 117 여 | |
| 치수(mm) | 31 (여)엑스 258.9 (디) 엑스 399.1 (시간) |
| 무게(킬로그램) | 2.2 |
Huawei MPLA Board Product Light Indicator
| Indicator Silk | Indicator name | Indicator Status | Indicator Description |
| RUN ALM | Running status indicator | Flashing green (cycle 1s) | The board is operating normally |
| Green flashing (period 0.25s) | Single board startup | ||
| Orange flashing | High temperature alarm | ||
| Steady red | Single board operation failure | ||
| ACT | Active and standby status indicator | Always green | In active / standby mode, the board is in active state |
| Off | When in active / standby mode, the board is in standby state | ||
| USB | USB interface status indicator | Always green | USB device recognition is normal |
| Flashing green | USB device has data interaction | ||
| Off | USB device is not connected or USB device is abnormally connected | ||
| LINK/ACT | Link / data status indicator | Always green | Port establish connection |
| Flashing green | There is data transmission | ||
| 0～3 | Off | No connection |
Huawei MPLA Board Product Features
- Control plane supports active / standby switchover
- Provide maintenance serial port CON and maintenance network port ETH, support local and remote maintenance
- Provide environmental monitoring serial port ESC, support environmental monitoring access
- Support load sharing at the forwarding level
- Support Ethrnet synchronization
- Support 1588v2 and 1588ACR
Huawei MPLA Board Product and More Related Models
| SCUN | SCUH | MPLA | MPLB | |
| Applied Equipment | MA5683T MA5680T | MA5683T MA5680T | MA5800-X7 | MA5800-X7 |
| MA5800-X15 | MA5800-X15 | |||
| MA5800-X17 | MA5800-X17 | |||
| 포트 | TX0 RX0 to TX3 RX3 | 10GE0/GE0 to 10GE3/GE3 | TX0 RX0 to TX3 RX3 | TX0 RX0 to TX3 RX3 |
| (4 x SFP GE ports) | (4 x SFP 10GE/GE ports) | (4 x SFP+/SFP 10GE/GE ports) | (4 x SFP+/SFP 10GE/GE ports) |
Huawei MPLA Board Product Applications
죄송합니다, 첨부파일이 없습니다 !
