Meanwell ELG-200-36A Led Driver

Description

Meanwell ELG-200-36A Led Driver is a 200W LED AC to DC driver featuring constant current output and constant voltage output design.

Meanwell ELG-200-36A Led Driver General Introduction

This series can operate at input voltages of 100-305VAC and offers a variety of models with output voltage ratings between 12V and 54V. With a high conversion efficiency of up to 91%, the fanless design allows it to operate at a temperature range of -40-90° under natural air cooling. The metal housing and IP67/IP65 high degree of protection design make the ELG-200 series suitable for indoor and outdoor applications. The ELG-200 is equipped with a variety of function options such as several dimming methods to provide design flexibility for the lighting system.

Meanwell ELG-200-36A Led Driver Product Picture

Meanwell ELG-200-36A Led Driver Datasheet

ModelCategoryIP LevelInput/Output typeIntroduction
BlankStandardIP67CableIO/VO Fixed
AStandardIP65CableIO/VO Adjustable via Built-in Potentiometer
BStandardIP67Cable3 in 1 Dimension function (0-10 Vdc,10V PWM signal and resistance
D2StandardIP67CableSmart timer dimming function
DAStandardIP67CableDali function
MODELELG-200-36ELG-200-12ELG-200-24ELG-200-42
OUTPUTDC VOLTAGE36V12V24V42V
CONSTANT CURRENT REGION18 ~ 36V6 ~ 12V12 ~ 24V21 ~ 42V
RATED CURRENT5.55A16A8.4A4.76A
RATED POWER200VAC ~ 305VAC
199.8W192W201.6W199.9W
100VAC ~ 180VAC
149.76W144W150W149.94W
RIPPLE & NOISE (max.)250mVp-p150mVp-p200mVp-p250mVp-p
VOLTAGE ADJ. RANGEAdjustable for A-Type only (via the built-in potentiometer)
33.5 ~ 38.5V11.2 ~ 12.8V22.4 ~ 25.6V39 ~ 45V
CURRENT ADJ. RANGEAdjustable for A-Type only (via the built-in potentiometer)
2.78 ~ 5.55A8 ~ 16A4.2 ~ 8.4A2.38 ~ 4.76A
VOLTAGE TOLERANCE±2.0%±3.0%±2.0%±2.0%
LINE REGULATION±0.5%±0.5%±0.5%±0.5%
LOAD REGULATION±0.5%±2.0%±0.5%±0.5%
SETUP, RISE TIME500ms, 100ms/230VAC,   1000ms, 100ms/115VAC
HOLD UP TIME (Typ.)10ms/ 230VAC  10ms/ 115VAC
INPUTVOLTAGE RANGE100 ~ 305VAC    142 ~ 431VDC
FREQUENCY RANGE47 ~ 63Hz
POWER FACTORPF>=0.97/115VAC,PF>=0.95/230VAC PF>=0.92/277VAC at full load (Please refer to “Power Factor Characteristic” curve)
TOTAL HARMONIC DISTORTIONTHD< 20% when output loading>=50% at 115VAC , 230VAC input ; and output loading>=75% at 277VAC input
EFFICIENCY (Typ.)92%90%92%92.50%
AC CURRENT1.8A / 115VAC      1.2A / 230VAC      1.0A/277VAC
INRUSH CURRENT (Typ.)COLD START 60A(twidth=510μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A  CIRCUIT BREAKER4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT<0.75mA / 277VAC
NO LOAD / STANDBYNo load power consumption <0.5W for Blank / A / Dx / D-Type
POWER CONSUMPTIONStandby power consumption <0.5W for B / DA-Type
PROTECTIONOVERCURRENT95 ~ 108%
Protection type: Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUITHiccup mode recovers automatically after fault condition is removed
OVERVOLTAGE42 ~ 49V13.5 ~ 18V27 ~ 34V47 ~ 54V
Protection type: Shut down o/p voltage, re-power on to recovery
OVER TEMPERATUREShut down o/p voltage, re-power on to recovery
ENVIRONMENTWORKING TEMP.Tcase=-40 ~ +90°C(Refer to “Derating Curve”)
MAX. CASE TEMP.Tcase=+90°C
WORKING HUMIDITY20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY’-40 ~ +90°C,10~95% RH
TEMP. COEFFICIENT±0.03%/°C (0 ~ 50°C)
VIBRATION10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMCSAFETY STANDARDSU8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384;GB19510.1, GB19510.14,B19510.1; IP65 or IP67 approved
DALI STANDARDSCompliy with IEC62386-101, 102, 207 for DA-Type only
WITHSTAND VOLTAGEI/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH
EMC EMISSIONCompliance to EN55015,EN61000-3-2 Class C (>=50% loading) ; EN61000-3-3; GB17625,GB17743
EMC IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV)
OTHERSMTBF826.7K hrs min. Telcordia SR-332 (Bellcore) ; 200.8Khrs min.  MIL-HDBK-217F (25°C)
DIMENSION244 71**37.5mm (L*W*H)
PACKING1.05Kg 12pcs/13.6kg/0.72CUFT

Meanwell ELG-200-36A Led Driver  Application scenario

LED Street Lighting

LED bay Lighting

LED floodlighting

LED architectural Lighting

Type ”’HL” for use in Class I, Division 2 hazardous (Classified) location

Comply with class II application





    Sorry, no attachment available !

    has been added to your cart:
    Checkout