Cisco QSFP-100G-LR4-S= SFP series firstly give users a variety of low-power and high-density 100 Gigabit Ethernet connectivity choices for data center, high-performance computing networks, enterprise core, and distribution layers, and also service provider applications. The QSFP-100G modules are therefore new generation of 100G transceiver modules solution based on QSFP (Quad Small Form-Factor Pluggable) form factor.
Cisco QSFP-100G-LR4-S= SFP Product Picture
Cisco QSFP-100G-LR4-S= SFP Product further Feature
then, here are a few features for this module.
1， High-speed electrical interface compliant to IEEE 802.3bm
2， Interoperable with other IEEE-compliant 100GBASE interfaces where applicable
3, ， Hot-swappable input/output device plugging into a 100G Gigabit Ethernet Cisco QSFP port
4, Certified and tested on Cisco QSFP-100G ports for superior performance, quality, and reliability
Cisco QSFP-100G-LR4-S= SFP Product Specification
Then, let’s see Cisco QSFP related datasheet
|Model||Production Descriptions||Connector Type|
|QSFP-100G-LR4-S||100GBASE LR4 QSFP Transceiver, LC, 10km over SMF||LC|
|QSFP-100G-SR4-S||100GBASE SR4 QSFP Transceiver, MPO, 100m over OM4 MMF||MPO-12 (12 fibers)|
|QSFP-40/100-SRBD||100G and 40GBASE SR-BiDi QSFP Transceiver, LC, 100m OM4 MMF||LC|
|QSFP-100G-ER4L-S||100GBASE QSFP Transceiver, 25-40KM reach over SMF, Duplex LC||LC|
|QSFP-100G-CWDM4-S||100GBASE CWDM4 QSFP Transceiver, LC, 2km over SMF||LC|
|QSFP-100G-PSM4-S||100GBASE PSM4 QSFP Transceiver, MPO, 500m over SMF||MPO-12 (12 fibers)|
|QSFP-100G-SM-SR||100GBASE CWDM4 Lite QSFP Transceiver, 2km over SMF, 10-60C||LC|
|QSFP-100G-CU||100GBASE-CR4 Passive Copper Cable|
|(1M, 2M, 3M, 5M)|
|QSFP-4SFP25G-CU||100GBASE QSFP to 4xSFP25G Passive Copper Splitter Cables|
|(1M, 2M, 3M, 5M)|
|QSFP-100G-AOC||100GBASE QSFP Active Optical Cables|
|(1M, 2M, 3M, 5M, 7M, 10M, 15M, 20M, 25M, 30M)|
Above all, Here is Ordering Information
|QSFP-100G-LR4-S||Cisco 100GBASE-LR4 QSFP Transceiver, LC, 10km over SMF|
Additionally, Here are some other 100G module with different form factors
The Cisco QSFP-100G-PSM4-S Module supports link lengths of up to 500 meters over SMF with MPO connectors. The 100 Gigabit Ethernet signal is carried over 12-fiber-parallel fiber terminated with MPO multifiber connectors.
Cisco QSFP-100G to four SFP-25G copper direct-attach breakout cables (Figure 2) are suitable for very short links and offer a cost-effective way to connect within racks and across adjacent racks. These breakout cables connect to a 100G QSFP port of a Cisco switch on one end and to four 25G SFP ports of a Cisco switch/server on the other end. Cisco currently offers passive cables in lengths of x=1, 2, 3 and 5 meters.
The Cisco QSFP-100G-CWDM4-S Module supports link lengths of up to 2 km over a standard pair of G.652 Single-Mode Fiber (SMF) with duplex LC connectors. The 100 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device.
The Cisco QSFP-100G-SM-SR QSFP module supports link lengths of up to 2 kilometers over a standard pair of G.652 Single-Mode Fiber (SMF) with duplex LC connectors.
The 100 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device. The operating temperature range is from +10 to +60°C with an optical link budget of 4.2 decibels. This 4.2-decibel link budget offers the ability to support the loss from patch panels in the link in a data center environment. QSFP‑100G‑SM-SR is interoperable with QSFP-100G-CWDM4-S.
Cisco QSFP-100G-LR4-S= SFP Product Application
Sorry, no attachment available !