Huawei SmartAX MA5800 X15 OLT

Description

Huawei SmartAX MA5800 X15 OLT is  NG OLT, 19inch, with 11U height 15 service slots, 200G throughput per slot, supporting GPON, 10G PON, 40G/100G PON ready; H901BPIB subrack equipped with 2xH901MPLA, 2xH901PILA

Huawei SmartAX MA5800 X15 OLT Product Overview

Huawei SmartAX MA5800 X15 OLT  (MA5800-X15 for short) is the industry’s first distributed architecture intelligent aggregation OLT platform。 MA5800 X15 proviDES xPON, P2P GE and 10GE access. Huawei MA5800-X15 supports a variety of networking modes, including FT Tx and D-CCAP, to meet the needs of various service scenarios such as home access, enterprise access, mobile bearer, and Wi-Fi hotspot backhaul. Full business.

Huawei SmartAX MA5800 X15 OLT Product  Pictures

Huawei SmartAX MA5800 X15 OLT YCICTHuawei SmartAX MA5800 X15 OLT YCICT

Huawei SmartAX MA5800 X15 OLT YCICT Huawei SmartAX MA5800 X15 OLT PRICE AND SPECS HUAWEI OLTHuawei SmartAX MA5800 X15 OLT YCICT Huawei SmartAX MA5800 X15 OLT PRICE AND SPECS MA5800 X17 NEW AND ORIGINAL

Huawei SmartAX MA5800 X15 OLT Product Specifications

Item MA5800-X17 MA5800-X15 MA5800-X7 MA5800-X2
Dimensions (W x D x H) 493 mm x 287 mm x 486 mm 442 mm x 287 mm x 486 mm 442 mm x 268.7 mm x 263.9 mm 442 mm x 268.7 mm x 88.1 mm
Switching Capacity of the System 7 Tbit/s 480 Gbit/s
Maximum Number of Ports in a Subrack 272 x GPON/EPON 240 x GPON/EPON 112 x GPON/EPON 32 x GPON/EPON
816 x GE/FE 720 x GE/FE 336 x GE/FE 96 x GE/FE
136 x 10G GPON/10G EPON 120 x 10G GPON/10G EPON 56 x 10G GPON/10G EPON 16 x 10G GPON/10G EPON
136 x 10G GE 120 x 10G GE 56 x 10G GE 16 x 10G GE
544 x E1 480 x E1 224 x E1 64 x E1
Ambient Temperature -40°C to 65°C*
*: The MA5800 can start up at a lowest temperature of -25°C and run at -40°C. The 65°C temperature refers to the highest temperature measured at the air intake vent
Working Voltage Range -38.4V DC to -72V DC DC power supply:
-38.4V to -72V
AC power supply:
100V to 240V
Layer 2 Features VLAN + MAC forwarding, SVLAN + CVLAN forwarding, PPPoE+, and DHCP option82
Layer 3 Features Static route, RIP/RIPng, OSPF/OSPFv3, IS-IS, BGP/BGP4+, ARP, DHCP relay, and VRF
MPLS & PWE3 MPLS LDP, MPLS RSVP-TE, MPLS OAM, MPLS BGP IP VPN, tunnel protection switching, TDM/ETH PWE3, and PW protection switching
IPv6  IPv4/IPv6 dual stack, IPv6 L2 and L3 forwarding, and DHCPv6 relay
Multicast IGMP v2/v3, IGMP proxy/snooping, MLD v1/v2, MLD Proxy/Snooping, and VLAN-based IPTV multicast
QoS Traffic classification, priority processing, trTCM-based traffic policing, WRED, traffic shaping, HqoS, PQ/WRR/PQ + WRR, and ACL
System Reliability GPON type B/type C protection, 10G GPON type B protection, BFD, ERPS (G.8032), MSTP, intra-board and inter-board LAG, In-Service Software Upgrade (ISSU) of the control board, 2 control boards and 2 power boards for redundancy protection, in-service board fault detection and rectification, and service overload control

Huawei SmartAX MA5800 X15 OLT Product Features

Huawei SmartAX MA5800 X15 OLT is widely recognized by operators as the FTT x network has advantages in full-service bearer, bandwidth upgrade and network maintenance. The global mainstream operators have begun to use FTTx networks for high-value enterprise customer access and mobile.

Huawei SmartAX MA5800 X15 OLT is designed to adapt to the trend of “flat capacity and less office” in the flattening of the network and the CO room. The new generation of OLTs needs to have the capability of access aggregation and integration to achieve “one fibre full service, unified-access layer”.

Huawei SmartAX MA5800 X15 OLT is a unified aggregation platform for the full-service fibre access network. The new-generation OLT needs to have high-reliability networking capabilities and support three high-reliability designs on the device side, line side, and network side. At the equipment layer, all components of the OLT are designed with dual backup redundancy to prevent single point of failure.

Huawei SmartAX MA5800 X15 OLT Service Cards

Control Board
H901MPLB 4 GE/10GE upstream transmission ports and supports load sharing. By default, MA5800 connects to upstream network through the control board
H901MPLA
H901CKUA stratum-3 clock functions by working with MPLB and MPLA
Uplink interface board
H901NXED Enhanced 8-port 10GE upastream interface board, supporting 10GE/GE Ethernet upstream transmission. NXED is used when upstream ports currently provided in MA5800 are not enough.
Universal interface board
H901CIUA synchronous time/clock signal input&output interfaces, alarm parameter/Boolean value input&output interface. RS485 serial ports, and provides transparent transmission Ethernet ports.
Service board
H901GPHF 16 GPON ports for access services
H901GPSF 16 GPON ports for home access services
H901XGHD 8 asymmetric 10G GPON ports for access services.
H901TWED 8 symmetric 10G GPON ports for access services.
H901EDSH 32-channel E1 upstream board, supporting native TDM mode.
H901OGHK 48-port aggregated GE/FE optical interface board, supporting up to 48 channels of GE/FE
H901OXHD 8-port aggregated 10GE optical interface board, supporting GE/10GE Ethernet aggregation.
Powerboard
H901PILA -48V DC input
Fan Monitoring board
H901FMLA Supplier power to fans; controls and monitors the fans
H901FMMA Supplier power to fans; controls and moniotes the fans

Huawei SmartAX MA5800 X15 OLT Product Applications

Huawei SmartAX MA5800 X15 OLT Product Applications YCICT

 

 





    has been added to your cart:
    Checkout